Apex
225mm high aluminium planter edge with 12mm thick folded top edge.
225mm high aluminium planter edge with 12mm thick folded top edge.
Based on our flagship aluminium edging, Apex is an affordable and off-the-shelf alternative to bespoke low-planter systems.
But this convenience and cost saving doesn’t mean it’s an inferior product. Manufactured from the highest grade durable aluminium (6005A), Apex is a sturdy 3mm thick.
Its natural milled finish brings cool sophistication and low-maintenance practicality to any combination of soft and hard landscaping. If you would rather have a slightly warmer effect, it is also available to order in a durable anodic bronze-effect finish.
Standing at 225mm high from its integral fixing feet, it is tall enough to create a clear step around planted areas even after hard landscaping has been laid.
Installing Apex is easy. It can be easily cut with an angle grinder or hacksaw. Its straight lengths and preformed internal and external corners simply clip together for instant alignment. Pre-drilled holes in the feet allow it to be attached to solid concrete with concrete fixings, laid on compacted Type 1 hardcore with spike fixings or secured to a roof terrace system frame. As no haunching is required to keep the edging from moving, hard landscaping can be installed as soon as it has been fixed down.
Suitable for
Use with
Fixing Details
This product is laid directly onto a sub-base of cured concrete and secured into position using concrete fixings. This product is available in rigid lengths only along with pre-formed internal and external corners.
The lengths are joined together with 2 strip connectors, inserted halfway on either side, into the channel on the inside of the edging. Connector strips are supplied as a unit of 15.
Apex Edging | ||||||||
Code | Type | Height | Edging Thickness (Top) | Edging Length | Edging Foot Width | Standard Finish | ||
103030 | Rigid Edging Length | 225mm | 12mm | 2500mm | 85mm | Mill Aluminium | ||
101031 | Rigid 90⁰ Internal Corner | 225mm | 12mm | 150mmx150mm | 85mm | Mill Aluminium | ||
101032 | Rigid 90⁰ External Corner | 225mm | 12mm | 150mmx150mm | 85mm | Mill Aluminium | ||
Fixings | ||||||||
Code | Product | Pack Qty | ||||||
Apex 225mm Connectors Galvanised | ||||||||
Bespoke finishing is also available upon request.
Finishes include:
Please Note: Apex in stainless steel effect, anodic bronze effect or powder coated will be custom-made, therefore a lead time of 4-6 weeks is to be expected.
Minimum order quantity for special finishes: 24 lengths